Tenovis Integral T3 Compact Operating Instructions Manual page 27

Diverting calls
Only divert calls for your telephone under certain circumstances -
If you have set up the call diversion as described on Page 26, all calls will be diver-
ted to the desired call number.
If you only want to divert your calls
1. if your telephone is busy
2. or when you have not answered a call after a particular number of ringing
tones
then proceed as described on page 26 and, instead of to: , select
On busy:
1.
No reply:
2.
• If a call diversion destination you have set up cannot be activated (an error tone
is heard after pressing the "OK" key), then another call diversion destination is
already activated. This must then be deactivated (select and confirm with "OK").
• The "Divert call" function key allows you to run through a number of operating
steps more quickly. It has different functionality depending on the number of call
diversion destinations you have set up:
No call diversion destination has yet been set up: Pressing the "Divert call"
function key takes you to the Call diversion menu.
One call diversion destination has been set up: This call diversion destination
set up can be activated and deactivated by pressing the "Divert call" function key
(the LED lights up when "on").
Several call diversion destinations are set up: If a call diversion destination is
active (LED on), it can be deactivated by pressing the "Divert call" function key. If
no call diversion destination is active, you enter the call diversion menu and you
can then activate a diversion that is already set up or set up a new call diversion
destination.
Using your telephone as normal
continued
i
27