Cutter(Option); Labeltakensensor(Option) - Intermec EasyCoder PM4i User Manual

EasyCoder PM4i Printer User's Guide (IPL Version)
Cutter (option)
Bydefault,"NotInstalled"isdisplayed.Ifacutterisinstalled,
youmustmanuallyindicatethatconditiontothefirmwareby
selectingeither"Enable"or"Disable."Onceyouhavedonethat,
youcanalsouseIPLcommandstoenableordisablethecutter:
<STX>R<ETX>
<STX>SIc0<ETX>
<STX>SIc1<ETX>
Label Taken Sensor (option)
Tomaketheprinterworkinself-stripmode,thatis,waitingfora
labeltoberemovedbeforethenextlabelisprinted,theself-strip
modemustbeenabled.Thiscanalsobedonebyexecutingthe
followingcommands:
<STX>R<ETX>
<STX>SIt0<ETX>
<STX>SIt1<ETX>
Ifthelabeltakensensordoesnotworkproperly,thesensitivity
canbecalibratedintheSetupMode.Select"LTSCalibration"
andfollowtheinstructionsinthedisplay.Makesurethatno
directsunlightorinteriorlightinginterfereswiththelabeltaken
sensor.
Chapter 6 — Setting Up the Printer