Fog Fluid Types - Martin Magnum 1200 User Manual

Fog fluid types

The following types of Martin/Jem fog fluid are suitable for use in this machine.
Each produces a different effect as described below. Martin supplies high
quality fog fluids that are based on ultra-pure deionized water. Use only the
following genuine Martin/Jem fog fluids. No other fluid is suitable for use.
DANGER! The Magnum smoke machine can run safely only on the specific
smoke fluids it is designed for. Use ONLY the Martin/Jem smoke fluids
designated in this manual. NEVER use any other type of fluid, or toxic gas may
be produced. You will probably also cause damage to the system that is not
covered by the product warranty. Do not dilute smoke fluid with water or any
other liquid. Discard smoke fluid if it becomes contaminated.
R e g u l a r D J F l u i d ( D J m i x )
Regular DJ fluid is an economical fluid that gives a good, medium density
smoke well-suited for atmospheric effects.
P r o S m o k e S u p e r ( Z R m i x )
Pro Smoke Super fluid is a high-quality, general purpose fluid that produces a
dense white airborne fog with medium dispersal time. Its medium to high index
of refraction permits both good atmospheric effects and denser "white-outs".
P r o S m o k e H i g h D e n s i t y ( S P m i x ) – M a g n u m 1 8 0 0 o n l y
Pro Smoke High Density fluid generates a high density, white, airborne fog with
a very high index of refraction and slow evaporation rate. It is well suited for
scenic obscuring, dramatic strobe effects, and "white-outs".
18
SP mix smoke fluid is not suitable for use in the Magnum 1200
machine.
Fog fluid types