Setting Up - Martin Magnum 1200 User Manual

S e t t i n g u p
Fill the fluid tank with MARTIN-approved fluid (see page 18). The fluid
compartment is opened by pulling outwards on the cover (pull using a finger in
the round hole). The cover is held closed by a magnetic catch and hinges
upwards.
If DMX control is being used, connect the machine to the DMX line (see page
16).
Connect the remote to the REMOTE IN socket on the back panel.
If you are operating several machines using the machine-to-machine link
function, connect up the machines in a daisy-chain using RJ45 (computer
network) type cables. The maximum total length of cable, including the remote
cable, is 50 metres.
Do not connect a computer network to the RJ45 remote / link sockets on the
Magnum. Although the connectors are compatible, the electrical signals are not,
and equipment may be damaged.
10
The optional DMX module is required to use the Magnum 1200 with
DMX.
Installation and setting up
to additional
machines