Removing And Installing The Redundant Power Supply Unit; Figure 21. Pulling Out The Node Tray; Figure 22. Restore The Dummy Tray Cover - Intel H2000 Series Service Manual

Hardware Installations and Upgrades

Figure 21. Pulling out the Node Tray

3. Restore the Dummy Tray Cover.

Figure 22. Restore the Dummy Tray Cover

Removing and Installing the Redundant Power Supply Unit

The system equipped with two CRPS for redundancy. Each of them can be hot swappable.
Caution: Installing two Power Supply Units with different wattage ratings in a system is
not supported. Doing so will not provide Power Supply Redundancy and will result in
multiple errors being logged by the system.
®
Intel Server System H2000JF Family Service Guide 13