Assembling The Blades - Casablanca Tribeca Owner's Manual And Installation Manual

6-1 . Using the provided Allen wrench, attach each blade to the
blade iron using three barrel nuts and three decorative
screws as shown .
Note: You have the option to install the blade above or
below the blade iron . In either instance, you may place the
decorative screws and barrel nuts facing up or down .
6-2 . Remove the two orange shipping rings from motor by lifting
up on the edge of the rings .
6-3 . Align the five holes in the blade iron ring and the decorative
ring with the five holes in the bottom of the motor and
partially install the five blade mounting screws .
6-4 . Once all five of the screws are partially installed, tighten
them securely .
Shipping
Ring
Step 6-2
Note: The blades on this fan have been treated
with Dust Armor protection, making the blades
less likely to attract dust and dirt . Use a dry or
slightly damp lint free cloth to clean the blades .
Do not use a furniture polish or any other cleaners
that leave any residue, as they will damage the
protective Dust Armor on the blades .
6 • Assembling the Blades
Blade Iron
Ring
Decorative
Ring
Blade
Mounting
Screw
11
11
M6000-01 • 08/22/14 • Casablanca Fan Company
Blade Iron Barrel Nut
Step 6-1
Allen Wrench
Steps 6-3 - 6-4
Decorative
Screw