During An Active Call; Mute; Call Waiting - Alcatel IP1020P Administrator's Manual

4.4 During an Active Call

4.4.1 Mute

This function allows you to mute your handset microphone during a call; you cannot be
heard by the other party. You can still hear all other parties while mute is enabled.
To mute/resume the conversation using your handset keypad:
Press Mute key
icon will be displayed on the LCD and the mute key will flash with short duty cycle.
Press same key again to un-mute. When you press button all of the conversations will
be muted.

4.4.2 Call Waiting

This call feature allows your system to accept additional incoming calls when there is
already one active call.
Alcatel IP1020 handles this feature on a handset basis, i.e, each user can decide
whether his handset will accept a second call while he is in conversation or not,
independently of the sip account used for that call. A handset supports two calls at a
time.
By default Call Waiting is enabled for each registered handset, and when an incoming
call is received during another active call, a warning tone will be played periodically.
In this situation, user can accept the second call using the Accept softkey. The first one
will be put on hold automatically, or reject the call using Reject softkey.
If you accept the waiting call you will be able to perform other actions using the in-call
menu options and softkeys:
Switch between the two calls (Call Swap) with Switch softkey,
Bridge your two correspondents together with you (Call Conference) with Conf softkey,
Leave the call and have your correspondents talking together (Call Transfer) with
Alcatel IP1020 Administrator Guide
during a conversation to mute all the conversations, the
ed1.0
47/58