Line Selection; Intercom Calls; Anonymous Call - Alcatel IP1020P Administrator's Manual

Or
Press Redial button (up navigation key) to enter the redial list, then choose a record
and press the off hook key
Or
Press a a digit key which has been set as speed dial.
To terminate a call simply press the On-hook key

4.1.3 Line selection

Dial methods in previous chapter assume you are using the default line (account)
assigned to your handset.
If your handset has more than one line assigned and you wish to use one of them,
different from the default line, all you have to do is substitute "press Off hook key" with
"long press Off-hook key" in all instructions given above. This way you will get the Line
Selection menu.
So, for example:
Press Redial button (up navigation key) to enter the redial list, then choose a record
and long press the off hook key to get the Line Selection menu. Choose the line you
want to use and press off hook key or Dial softkey to launch the call.

4.1.4 Intercom calls

Alcatel IP1020 supports internal calls among different handsets subscribed to the base.
To place an internal call, press INT (Down navigation key). The display of your IP20 will
list the handsets subscribed to the base. Press Select softkey to launch the call.

4.1.5 Anonymous call

Anonymous call, also known as Caller ID restriction, allows you to request the network
to hide your subscriber identity when you are performing outgoing calls.
Alcatel IP1020 supports Permanent Caller ID restriction, meaning that while enabled all
calls will request to be anonymous and you need to disable if you want your identity to
be transmitted. This service can be performed locally, or by sending an activation code
to the network.
Additionally, Alcatel IP1020 allows you to automatically reject anonymous incoming
calls.
These services can be managed through both handset and Web interfaces.
Alcatel IP1020 Administrator Guide ed1.0
34/58