Operation Tones; Codec Selection - Alcatel IP1020P Administrator's Manual

3.2.3 Operation Tones

You can decide whether the following tones are active or not:
Key tone
Low battery warning
Out of range warning
To make your choice using the handset interface, please
Press MenuSettingsAudioOperation Tones
Use up/down navigation keys to browse through the parameters, and left/right to
adjust the value. Then press Save or Back to store or discard your changes.

3.2.4 Codec Selection

Alcatel IP1020 supports the following voice codecs: G722, G711-PCMU, G711-PCMA,
G729, G726, ILBC, and ILBC-20.
You can change codec configuration via WUI. Available settings allow to enable/disable
and set priorities for the codecs, independently for each account. Please contact your
System Administrator for more details about the codecs.
On the WUI, select SystemSIP Account Management, and Edit the account you
want to configure. Make your choices and click Save to store your changes.
Note:
Codec Selection can only be done via Web interface.
Alcatel IP1020 Administrator Guide ed1.0
23/58