2.3 The Rear Ports
Port
PWR
RESET
WAN
LAN
(1x-4x)
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or restore to
factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used when
you can not login to the router, e.g. forgot the password)
Connect an UTP Ethernet cable to this port when connecting to a hub.
Connect a crossover cable to this port when connecting to a DSL/Cable
bridge or modem for establishing WAN connections.
Connect an UTP Ethernet cable to these four ports when connecting to
a LAN of 10Mbps or 100Mbps such as an office or home network.
Chapter 2 Using the Broadband Router
Meaning
5