Table of Contents
Advertisement
Chapter 3 Configuration
Auto-disconnect if idle for more than
minutes: Check this radio button if you want to
establish a PPPoE session only when there is a packet requesting for going out to the Internet.
The device will be auto-disconnected when there is no activity on the line for a predetermined
period of time. You can input any number from 0 to 999. The default value is 5 minutes.
After all of the settings are done, you need to click on "Apply" button to save them
permanently.
Fixed IP
Configure this WAN interface with a specific IP address. This IP address should be given from
ISP directly.
IP Address: Enter the information provided by your ISP.
Subnet Mask: Enter the information provided by your ISP.
Gateway Address: Enter the information provided by your ISP.
NAT: The NAT feature allows multiple users to access Internet through a single IP account,
sharing the single IP address. If users in the LAN site have public IP addresses and can access
Internet directly, the NAT function can be disabled.
3.4.3.2.2 DNS
A Domain Name System (DNS) contains a mapping table for domain name and IP address. In
the Internet, every host has a unique and friendly name such as www.yahoo.com and IP
25
Advertisement
Table of Contents
