Factory Default Settings; Password - Billion BIPAC 6600 User Manual

Broadband firewall router

Hide thumbs Also See for BIPAC 6600:

Table of Contents

3.2 Factory Default Settings

Before you configure this device, you need to know the following default settings.

1. Web Configuration

Password : <BLANK>

BLANK means user does not need to input any characters.

2. Device IP Network settings in LAN site

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

3. ISP setting in WAN site

Obtain an IP address automatically

4. DHCP server

DHCP server is enabled.

IP address pool from IP Address: 192.168.1.100 to IP Address: 192.168.1.199

The password is left blank as the default setting. When configuring your router with Web

browser, just click "OK", and then you are logged in for the first time. It is recommended that

you set a password for security and management purpose. BIPAC 6600 maintains the

password only. It means BIPAC 6600 only checks the password even you enter characters in

the User Name field.

If you ever forget the password to log in, you may press the RESET button up to 2

seconds to restore the factory default settings.

Chapter 3 Configuration

Table of Contents