WINIPCFG.EXE
For Win95, 98, ME, the WINIPCFG program is used to gather information about the TCP/IP
connections that are active on your system. It cannot be used to dynamically adjust TCP/IP
connections. You can also renew leases (if allowed by the network), and get the current IP
address assignments through this program.
1. From Windows, go to Start
2. The following figure displays the adapter address and current TCP/IP address. Select the
correct Ethernet adapter that is installed in this computer at the "Ethernet Adapter
Information".
3. Click the "More Info >>" button to get detailed configuration information.
Run, enter WINIPCFG, and click "OK".
Chapter 4 Troubleshooting
Select the
correct Ethernet
adapter.
45