System; Time Zone - Billion BIPAC 6600 User Manual

Broadband firewall router

Hide thumbs Also See for BIPAC 6600:

Table of Contents

Billion BIPAC 6600 Broadband Firewall Router

address. The IP address is very hard to remember, so that you may just enter the friendly name

www.yahoo.com and DNS converts it to its equivalent IP address.

You can obtain Domain Name System (DNS) IP address automatically if ISP provides it when

you logon. This Obtain DNS address automatically selection is set as default when you

choose Obtain an IP Address Automatically, PPPoE, or Fixed IP as your WAN protocol.

Or your ISP may provide you with an IP address of DNS. If this is the case, you must enter the

DNS IP address. Moreover, if you set Fixed IP as your ISP protocol, you can only enter the

DNS IP Address instead of obtaining the address automatically.

3.4.3.3 System

There are five items under the System section: Time Zone, Firmware Upgrade,

Backup/Restore Settings, Default Settings, Restart and User Management.

BIPAC 6600 does not have a real time clock on board; instead, it uses the simple network time

protocol (SNTP) to get the current time from the SNTP server in outside network. Please

choose your local time zone and click Submit. You will get the correct time information after you

really establish a connection to Internet. The current time of selected time zone will be shown in

the Status – System window.

Table of Contents