Chapter 3; Configuration; Before Configuration - Billion BIPAC 6600 User Manual

Broadband firewall router

Hide thumbs Also See for BIPAC 6600:

Table of Contents

BIPAC 6600 can be configured with your Web browser.

standard application in following Operation Systems, Windows 95/98/NT/2000/Me/XP, Mac,

Unix and Linux. The product provides a very easy and user-friendly interface for configuration.

This section describes the configuration required by LAN-attached PCs that communicate with

BIPAC 6600, either to configure the device, or for network access. These PCs must have an

Ethernet interface installed properly, be connected to BIPAC 6600 either directly or through a

hub, and have TCP/IP installed and configured to obtain an IP address through a DHCP server

or a fixed IP address which must be in the same subnet of BIPAC 6600. The default IP address

of router is 192.168.1.254 and subnet mask is 255.255.255.0. The best and easy way is to

configure the PC to get an IP address from BIPAC 6600.

Please follow the steps below for PC's network environment installation. Before taking the first

step, please check your PC's network components. If your PC connects the Broadband Router

through Ethernet port, the TCP/IP protocol stack and Ethernet network adapter must be

installed. If not, please refer to MS Windows relative manuals.

Configuring PC in Windows XP

1. Go to Start / Control Panel (in

Classic View). In the Control Panel,

double-click on Network

Connections.

2. Double-click Local Area Connection.

Any TCP/IP capable workstation can be used to communicate with or through

BIPAC 6600. To configure other types of workstations, please consult the

manufacturer's documentation.

Chapter 3

The web browser is included as a

Table of Contents