The Graphic User Interface (GUI) Display screen (refer to Fig. 18) contains the following parameters
for on screen user interface display configuration:
<Channel Title> Set tab: click on this Set tab to enter the channel (camera) title
<Time Display>: select to enable the Time display
<Channel Title>: select to enable the Channel (camera) Title display
<Record Status>: select to enable the Record Status display
<Alarm Status>: select to enable the Alarm Status display
<Deflick>: select to enable the Deflick
<Transparency>: adjust the transparency of text display
<Resolution>: select the resolution of VGA display
Region Cover is a special feature which allows user to define coverage regions of certain areas
from the on screen display for privacy and security issues.
<Channel>: select the channel (camera) to be defined for the coverage regions
<Region Cover>
: click on this
☞
Note: User can define up to 4 coverage regions for each channel (camera) by clicking on the
following tabs.
<1> <2> <3> <4> tab: click on the tabs to enable the coverage regions
☞
Note: the tabs must be selected in order to be defined
<Set> tab: click on this Set tab to switch to full screen to define the enabled coverage regions
☞
Note: drag each coverage region on the full screen display to the preferred position. Right click
then select <back> to go back to the previous screen.
<Time Display>
: click on this
<Channel Title>
: click on this
<Set> tab: click on this Set tab to switch to full screen to position the Time Display and Channel
(camera) Title display on screen
☞
Note: Drag on the Time and Channel Title to the preferred position. Right click then select <back>
to go back to the previous screen.
<OK>: exit with the changes
<Cancel>: go back without the changes
4.5 Graphic User Interface (GUI) Display
to enable the Region Cover feature.
to enable time display
to enable channel (camera) title display
80