3.6 Hard Disk (HDD) Error
The HDD Error configuration screen (refer to Fig. 12) contains the following parameters for hard
drive (HDD) error configuration:
<Event Type>: No Disk
<Enable>: click on to enable the No Disk error alert
<Show Message>: show message when the No Disk error is detected
<Buzzer>: enable the buzzer alert when the No Disk error is detected
<Event Type>: Disk Error
<Enable>: click on to enable the Disk Error alert
<Show Message>: show message when the Disk Error is detected
<Buzzer>: enable the buzzer alert when the Disk Error is detected
<Event Type>: Disk Full
<Enable>: click on to enable the Disk Full alert
<Less Than %>: enter the percent of available space
<Show Message>: show message when the Disk Full condition is detected
<Buzzer>: enable the buzzer alert when the Disk Full condition is detected
<OK> tab: exit with the changes
<Cancel> tab: go back without the changes
57