Internet Connection For Remote Monitoring - Security Cams AD-800 User Manual

4.3.1 Connect the DVR to internet through a router or virtual server for remote
monitoring:
Step 1: Enter the IP address, Subnet Mask, and Gateway. Generally, the default gateway is the
router's IP address The DVR's IP address need to be in the same segment with router. Please
enable DHCP in both the DVR and router If DHCP is used.
Step 2; Forward the IP address, Media Port number, and HTTP Port number in Virtual Server setup
on the router or virtual server.
☞
Note: IP and Port Forwarding may be different in different routers and server. Please check your
router manual for details.
Step 3: Disable the firewall on router and virtual server.
Step 4: For dynamic IP internet service, the DDNS need to be configured either on the DVR or
router for remote monitoring. Please refer to DDNS configuration in NetService section for utilizing
Dynamic Domain Name Service (DDNS).
Fig. 16
66