Net Service - Security Cams AD-800 User Manual

The NetService screen (Refer to Fig. 17) contains the following parameters for the internet service
configuration:
☞
Note: Please contact your Internet Service Provider (ISP) for more information.
☞
Note: click on the <Set> tab to edit the highlighted parameter or double click on the parameter
line for editing.
<PPPOE>: (refer to Fig. 17.1)
<Enable>: enable/disable the PPPoE internet service login
<User Name>: enter the login user name
<Password>: enter the login password
<IP Address>: enter the IP address which is provided by the Internet Service Provider.
☞
Note: The PPPoE needs to be enabled and the User Name, Password, and IP address of ISP
need to be entered if PPPoE login is employed on the DVR. Please contact your Internet Service
Provider (ISP) for more information
<Set> tab: click on this <Set> tab to edit the highlighted parameter
<OK>: exit with the changes
<Cancel>: go back without the changes
<NTP>: (refer to Fig. 17.2)
<Enable>: enable the NTP internet service
<Server IP>: enter the NTP server IP
<Port>: enter the port
<Time Zone>: Select the Time Zone by Greenwich Mean Time (GMT)
<Update Period>: enter the update period
<OK>: exit with the changes
<Cancel>: go back without the changes
☞
Note: Table of Time Zones in the USA
Time Zones in the USA
Eastern Standard Time (
Central Standard Time (
Mountain Standard Time (MST)
Pacific Standard Time (PST)
<EMAIL>: (refer to Fig. 17.3):
<Enable>: enable/disable the email notification
<SMTP Server>: enter the name of the SMTP mail server
<Port>: enter the port
<Need SSL>: enable/disable the SSL (Secure Sockets Layer)
<User Name>: enter the user name
<Password>: enter the password
<Sender>: enter the sender

4.4 Net Service

GMT
) GMT -5
EST
) GMT -6
CST
GMT -7
GMT -8
Daylight Saving Time
GMT - 4
GMT - 5
GMT - 6
GMT - 7
67