Playback File Search - Security Cams AD-800 User Manual

2.2.1

PlayBack File Search

The Search Condition screen (refer to Fig. 6.1) contains the following search conditions for playback:
<File Type>: Select the following file types to be searched for playback
<All>: Select all types
<Alarm>: Select the recorded video files which were triggered by alarm
<MD> (Motion Detection): Select the recorded video files which were triggered
by camera motion detection
<Alarm/MD>: Select both alarm and motion detection triggered video files
<Manual>: Manually recorded video files
<General>: General scheduled video files
<Read/Write> / <Backup Device>: Select the file source from a Read/Write HDD or an external
backup device
<Channel>: Select the channel (camera) for play back search
<Start Time>: Select the beginning of time interval for play back search
<End Time>: Select the ending of time interval for play back search
<Play Mode>:
<Skip Decode>:
<Average Decode>:
<Full Decode>:
Step 1: Please confirm that the Sync Mode has been enabled.
Step 2: Set the search conditions for search.
Step 3: User has two options to start the Search and play:
Option A: Click on the [Search] tab to start the search. The found video files will be listed on the right
side of the PlayBack screen (refer to Fig. 6.2). Follow Step 5 under the PlayBack section to play the
video files(refer to Fig. 6.3).
Option B: Click on [Play] tab to start the search and play the first found video file.
<Cancel> tab: go back to previous screen
35