Main Menu - Security Cams AD-800 User Manual

The Main Menu (refer to Fig. 3) contains the following sub menu selections:
[Record] - select to go to the sub menu (refer to Fig. 4) for
[Schedule] - Schedule recording configuration
[PlayBack] - Video playback
[Backup] - Video file backup to USB storage
[Alarm] - select to go to the sub menu (refer to Fig. 8) for
[Motion Detect] - Motion detection configuration
[Video Blind] - Camera view blockage alert setting
[Video Loss] - Video loss detection setting
[HDD Error] - Hard drive error notification setting
[System] - select to go to the sub menu (refer to Fig. 13) for
[Genera]l - General system configuration
[Encode] - Video recording quality and frame rate configuration
[Network] - Network setup
[NetService] - Network services configuration
[GUI Display] - On screen display and video output resolution configuration
[PTZ Config] – not available on AD-600 model
[Video Seq.] - Camera display sequence configuration
[Advanced] - select to go to the sub menu (refer to Fig. 21) for
[HDD Mgmt]- Hard disk Management
[Account] - User account management
[Online Viewer] - Online viewer status
[Display Adjust] - On screen display position adjustment
[Auto Maint] - System auto maintenance setting
[Restore] - Reset system parameters to factory default
[Update] - System software update
[Misc Setting] - Audio Alarm Remote control setting
[Info] - select to go to the sub menu (refer to Fig. 30) for
[HDD Info] - Hard disk capacity and status
[BPS] - Bitrate per second
[LOG] - System log information
[Version] - System software version
[Logout] - select to go to the sub menu (refer to Fig. 34) for
[Logout] - System logout
[Reboot] – System reboot

1.5 Main Menu

25