The PlayBack screen (refer to Fig. 6) contains a Search icon and the following control buttons for
video files playback:
– Start to play the selected video file forward
– Start to play the selected video file backward
– Pause
– Stop Playing
– Slow Motion Forward (toggle between 4 different speeds)
– Fast Motion Forward (toggle between 4 different speeds)
– Previous video picture frame
– Next video picture frame
– Previous video file
– Next video file
– Repeat Playing
– Full Screen
Step 1: Select the "Search" icon
☞
Note: The hard disk that contains the recorded video files must be set to read/write or read only
for video playback state.
Step 2: Set the search conditions before searching.
☞
Note: Please confirm that the Sync Mode has been enabled
Step 3: Click the [Search] tab to start the search or [Play] tab to start the search and play the first
found file.
Step 4: The found video files will be listed on the right side of the screen (refer to Fig. 6.2).
☞
Note: H = Manual recorded file, R. Schedule recorded file, M = Motion/blind/loss detection
recorded file
Step 5: Click on the file to see the Starting Time and Ending Time (refer to Fig. 6.2).
2.2 Video File PlayBack
to search the playback files (refer to Fig. 6.1).
33