Chapter 1 - Main Screen And Main Menu; Power On; Turning Off - Security Cams AD-800 User Manual

Chapter 1
Main Screen and main Menu

1.1 Power On

Before you power on the equipment, please check all of the connections are properly connected.
Step1: Plug in the power cord to the socket on the rear panel (refer to 10 on Fig. B).
Step 2: Switch on the power switch on real panel
Step 3: Power Indicator will be on and the system will start loading
Step 4: System will generate a beep after system loading complete
Step 5: The System Login Menu will display (refer to Fig. 1)
☞
Note: The DVR will automatically recover to its previous state when the device is restarted from
the power off.

1.2 Turning Off

Before turning off the hard switch or disconnecting the power source to turn the system off, it is
strongly recommended that the user applies these following steps to have the best protection for
equipment and user applications:
A. Please confirm that the all of the hard disk (HDD) activities are properly stopped, which includes
"recording", "playback", "backup".
B. Please confirm that all of the user and remote monitoring activities and applications are properly
stopped and logout.
There are two steps to turn off the DVR; the soft switch and the hard switch. It is strongly
recommended that the user applies these two steps sequentially to have the best protection for
equipment.
Step1 - Soft Switch Off: select [Main menu] then select [Logout] then click on [Shutdown] to turn the
system off (refer to Fig. 35.).
Step 2 – Hard Switch Off: flip the power switch (refer to 18 on Fig. B) to turn the system off.
☞
Note: The cooling fan will remain on when the system is turned off by soft switch. The cooling fan
will turn off when the system is turned off by the hard switch.
This equipment is designed for the long term security surveillance applications. Frequently
disconnecting the power source is not recommended.
20