Network - Security Cams AD-800 User Manual

The Network screen (refer to Fig. 16) contains the following parameters for the network configuration:
<Net Card>:
DHCP Enable
<IP Address>: enter the IP address of this DVR
☞
Note: Default 192.168.1.10
<Subnet Mask>: enter the subnet mask
☞
Note: Default 255.255.255.0
<Gateway>: enter the gateway
☞
Note: Default 192.168.1.1
Generally, the default gateway is the router IP address if this DVR connects to internet through a
router
<Primary DNS>: enter the primary DNS
☞
Note: Generally, the default DNS is the router's IP address if this DVR connects to internet
through a router
<Secondary DNS>: enter the secondary DNS
<Media Port>: This Media Port (TCP) number is the port for video streaming
☞
Note: The default value is 34567. This video steam port needs to be forwarded on the router or
virtual server for video streaming.
<HTTP Port>: The HTTP port number is the port for IE browser accessing.
☞
Note: The default value is 80. This port needs to be forwarded on the router or virtual server for
remote monitoring. If the port value is changed, user needs to add the port number when typing the
IP address into the IE browser address bar .i.e.
set HTTP port to 88, IP address: http://192.168.0.50, user needs to enter that address as
http://192.168.0.50:88
<HS Download>:
<Transfer Policy>:
<Adaptive>:
<Quality Preferred>:
<Fluency Preferred>:
<OK> tab: exit with the changes
<Cancel> tab: go back without the changes

4.3 Network

to IE browser.
65