I Important Safety Information - Security Cams AD-800 User Manual

I
Important Safety Information
Stop using the equipment immediately if you detect condensation. Continued use may
damage the equipment. Remove the power cord and power supply from the power
outlet and wait until the moisture evaporates completely before resuming use.
Avoid strong magnetic fields. Never place the equipment in close proximity to electric
motors or other equipment generating strong electromagnetic fields. Exposures to
strong magnetic fields may cause malfunctions or corrupt image data.
Avoid condensation related problems. Moving the equipment rapidly between hot and
cold environments may cause condensation (water droplets) to form on its external and
internal surfaces.
Do not cover the ventilation opening or slots on the outer casing. To prevent the device
from overheating, provide at least two inches of air space around the vent and the slots.
Do not operate the equipment beyond its specified temperature, humidity or power
source ratings. Do not use the device in an extreme environment where there is high
temperature or high humidity. Use the device at temperatures within +0° C ~ +40° C
(32° F ~ 104° F) and humidity below 90 %. The normal operating power needed for this
device is DC 12V 50/60Hz.
Do not drop metallic objects into the device. This could permanently damage the
equipment. Immediately turn the power off or unplug the power cord and power supply
from the power outlet if this happens. Contact a qualified service personnel authorized
by your equipment distributor.
Do not attempt to disassemble or alter any part of the equipment that is not expressed
in this guide. Disassembly or alteration of this device may result in electrical shock.
Stop operating the equipment if a heavy object is dropped on the device and/or if the
casing is damaged. Also, do not strike or shake the device. Failure to do so may result
in fire or electrical shock. Immediately turn the equipment's power off and unplug the
power cord and power supply from the power outlet if this happens.
Do not allow the equipment to come into contact with, or become immersed in, water or
other liquids. Do not allow liquids to enter the interior. The equipment is not waterproof.
If the exterior comes into contact with liquids or salty air, wipe it dry with a soft,
absorbent cloth. In the event that the water or other foreign substances enter the interior,
immediately turn the equipment off and unplug the power cord and power supply from
the power outlet. Continued use of the equipment may result in fire or electrical shock.
Do not use substances containing alcohol, benzene, thinners or other flammable
substances to clean or maintain the equipment. The use of these substances may
6