Table of Contents
Advertisement
II
Important Maintenance Information
For your benefit, please follow these steps and you will increase the working lifetime of
the equipment.
Please read the manual and follow the warnings and instructions listed in it.
Do not block any ventilation openings. Ensure sufficient ventilation around the
equipment. The openings on the equipment are provided for ventilation and to ensure
reliable operation of
the equipment. The openings should never be blocked by placing the product on a bed,
sofa, rug, or similar surfaces. Equipment should never be placed near or over a radiator
or heat source, or in a built-in enclosure such as a bookcase or rack unless proper
ventilation is provided
.
Make sure the equipment is turned off before it is unplugged. Disconnect the power if it
has not been in use for a long period of time.
Do not power off the equipment during normal operation. Please follow the correct
procedures for shutting down the equipment to avoid damage of hard disk:
(1) Stop the recording first.
(2) Select the "logout" button on the menu screen to logout.
(3) Select the "Shutdown" button on the menu screen to logout.
(4) Turn off the power switch then disconnect the power cord.
(5) Wait for 30 seconds before restarting or moving the equipment.
Do not use liquid cleaners or aerosol cleaners when cleaning the device. Use only a dry
cloth for cleaning.
Do not use the equipment in a dusty or dirty work area. The ventilation openings should
be cleaned at regular intervals.
Do not operate your equipment near a source of heat or in direct sunlight. Do not place
the equipment near water or in extremely humid conditions.
Do not use the equipment near water or other liquids, or in rainy/moist situations. If
liquid gets into your equipment, turn it off and take it to your dealer for inspection.
Do not use the equipment in a potentially flammable work area.
Do not place this product on an unstable cart, stand, tripod, bracket, or table. Do not
drop the unit or subject the unit to major shocks or jolts. The product may not operate
normally
.
Do not exert pressure on the equipment such as stacking objects on it.
8
Advertisement
Table of Contents
