Schedule Recording - Security Cams AD-800 User Manual

The Schedule screen (refer to Fig. 5) contains the following parameters for schedule recording
configuration:
<Channel>: select the corresponding channel (camera) for schedule recording configuration
<Redundancy>: not available on AD-800 and AD-808
<Length in Minutes>: setup the length of each recording file
<PreRecord in Seconds>: start the video recording before the beginning of scheduled recording periods
<Mode>: select the following mode for the corresponding channel (camera)
<Schedule>
<Manual>
<Stop>
The following schedules need to be configured if the schedule recording is selected for the
corresponding channel (camera):
<Week>: select the day for scheduled recording setup
<Period 1>: set up the time interval of recording for Period 1
<Period 2>: set up the time interval of recording for Period 2
<Period 3>: set up the time interval of recording for Period 3
<Period 4>: set up the time interval of recording for Period 4
<Regular> : click on this
<Detect> : click on this
when camera detection is triggered
☞
Note: Please refer to Motion Detect, Video Blind, and Video Loss under the Main Menu>Alarm for
more information.
<Alarm> : click on this
alarm input is triggered.
☞
Note: not available on AD-600
<OK> tab: exit with the changes
<Cancel> tab: go back without the changes
Select on [Advanced] tab (refer to Fig. 5.1) for
<Back>: back to previous screen
<Main Screen>: short cut to Main Screen

2.1 Schedule Recording

: select to start the video recording by schedule
: select to start the video recording manually
: select to stop the video recording
to select the corresponding period for regular video recording
to select the corresponding period for detection triggered recording
to select the corresponding period for alarm triggered recording when
29