HER CHEE ATV-320 S Service Manual page 89

Chapter 4 Frame & Cover
FRONT BUMPER REMOVAL
Remove the front carrier.
Remove four bumper mounting bolts.
Remove the front bumper.
NOTE
◦ Attached all four bolts first, and after aligned
the bumper, then tighten the bolts.
INSTALLATION
Install the front bumper in the reverse order of
removal.
REAR BUMPER REMOVAL
Remove the rear carrier.
Remove four bumper mounting bolts.
NOTE
◦ The right side front bolt also tighten the muffler
bracket. For easily removing the rear bumper,
loosen another bracket mounting bolt, too,
Remove the rear bumper.
INSTALLATION
Install the rear bumper in the reverse order of
removal.
IV-10