Chapter 2 Fuel System & Carburetion
Air Cleaner Assembly
REMOVAL
Remove the seat.
Loosen the air cleaner case to air camber
connecting tube band.
Remove the four air cleaner case mounting bolts
and remove the air cleaner case.
INSPECTION AND CLEAN OUT
Disconnect the air filter assembly mounting
clamp.
Remove the air filter element cover.
Drain the accumulated water or dust.
Clean the air cleaner case and filter element with
compress air.
Inspect the filter element A and B, replace it if
necessary.
Install the filter assembly to air cleaner case.
NOTE
◦ Tighten the mounting clamp screw securely.
INSTALLATION
Install the air cleaner case in the reverse order of
removal.
NOTE
◦ Tighten the connecting tube band screw
securely.
II-11
Tube Band
Bolts
11