HER CHEE ATV-320 S Service Manual page 66

Chapter 2 Fuel System & Carburetion
Fuel Tank
REMOVAL
WARNING
◦ Do not smoke or allow flames or spark in the
work area.
Remove the seat.
Remove the front fender.
Remove fuel tank to frame mounting bolts.
Disconnect the fuel tube and vacuum tube on
fuel valve.
Disconnect the petrol gauge connector.
Remove the fuel tank from frame body.
FUEL VALVE INSPECTION
To Carburetor
Disconnect vacuum tube from fuel valve and fuel
tube from carburetor.
To Vacuum
Connect a commercially brake bleeder to
vacuum tube then pump the brake bleeder.
Check the fuel flow thru fuel tube, if it's block or
intermittently, replace the fuel valve.
INSTALLATION
Install the fuel tank in the reverse order of
removal.
Petrol Gauge Sensor
REMOVAL
Remove fuel tank.
Loosen four petrol gauge mounting bolts.
Remove petrol gauge from the fuel tank.
NOTE
◦ Do not damage or bend the float and float arm.
II-8
8