Chapter 1 Engine, Transmission & Gear
Check the level of coolant in the reserve tank
and fill to the correct level if the level is low.
Install the front light fender (280AS) or front
fender assy. (280AU).
Radiator
INSPECTION
Inspect the radiator soldered joints and seams
for leaks.
Blow dirt out from between core fins with low
pressure air.
If insects etc., are clogging the radiator, wash
them off with low pressure water.
REMOVEAL
Remove the front light fender (280AS) or front
fender assy. (280AU).
Drain the coolant.
Remove the radiator grill.
Disconnect the radiator upper and lower hoses
from the radiator.
Disconnect the fan switch wire.
Remove two mounting screws and radiator.
INSTALLATION
Install the radiator in the reverse order of
removal. Fill and bleed the coolant system.
I-36
Max.
Min.