HER CHEE ATV-320 S Service Manual page 71

Chapter 2 Fuel System & Carburetion
Exhaust System
REMOVAL
Disconnect the shaft selecting rod nut.
Loosen exhaust pipe front section to cylinder
head mounting nuts.
Loosen muffler silencer hanger mounting bolts.
Pull back the muffler assembly for removal.
Bend the exhaust pipe front section to release
pipe springs.
INSPECTION
Check the exhaust pipe gasket, replace it if
necessary.
INSTALLATION
Install the muffler assembly in the reverse order
of removal.
NOTE
◦ Tighten the exhaust pipe front section to
cylinder head mounting nuts properly.
Start the engine to check any leak thru gasket.
II-13
13