HER CHEE ATV-320 S Service Manual page 85

Chapter 4 Frame & Cover
REAR FENDERS
REMOVAL
Remove the seat by flip back the latch level and
lift the back end of seat.
Remove left and right floor panels. Flip
Remove rear carrier.
Disconnect tail light and L/R indicator light
connector.
Remove upper fender to frame mounting bolts
and front to rear fender joint bolts.
Remove two lower mount bolts.
Remove tail light fender. (320S)
Open the rear luggage box and remove the
mounting bolt. (320S)
Raise up the fender and pull to back to remove
the rear fender.
INSTALLATION
Install the rear fender in the reverse order of
removal.
NOTE
◦ Be sure to insert floor panel tabs to front and
read fenders corresponding slots.
IV-6