HER CHEE ATV-320 S Service Manual page 21

Chapter 1 Engine, Transmission & Gear
Cylinder Head
CYLINDER HEAD REMOVAL
Remove the thermostat housing bolt and
thermostat housing from the cylinder head.
Remove the cam chain adjuster sealing bolt and
spring.
Remove the two cam sprocket holder bolts.
Thermostat housing bolt
Derail the cam chain from the cam sprocket teeth
and remove the cam sprocket.
Remove the cylinder head base bolt.
Remove the four cylinder head cap nuts and four
copper washer.
Remove the cylinder head.
Remove the cylinder head gasket and dowel
pins.
Remove the two bolts and carburetor insulator.
Remove all gasket material from the cylinder
head mating surface.
NOTE
。Careful not to drop the gasket material into
cylinder.
I-12