HER CHEE ATV-320 S Service Manual page 13

Chapter 1 Engine, Transmission & Gear
ENGINE INSTALLATION
Move the engine into the frame
Insert the front engine bracket to correct position
then insert the bolts.
Insert all other engine mounting bolts and tighten
the nuts by following steps.
A. Rear lower engine mount
Torque value: 40 – 55 N.m (29 – 40 ft.lb)
B. Front engine mount
C. Front engine bracket
Torque value: 40 – 55 N.m (29 – 40 ft.lb)
D. Rear upper hanger plate
Torque value: 18 – 24 N.m (13 – 16 ft.lb)
E. Rear engine mount.
Torque value: 40 – 55 N.m (29 – 40 ft.lb)
Install the removed parts in the reverse order of
removal.
Refill coolant to specified volume and connect
battery terminals.
NOTE
◦ Checked all connect points and oil level before
restart the engine.
B
D
I-4
A
C
D
E