Chapter 4 Frame & Cover
FRONT FENDER
REMOVAL
320S
NOTE
◦ The aid of an assistant will be required when
removing front panel.
Remove L/R floor panel.
Remove front fascia and disconnect headlight
wire.
Disconnect indicator light and main switch wire.
Remove L/R side cover and front to rear joint
bolts.
Remove speedometer cover and handle bar
supporter then make handle bar freely for
moving.
Remove fender to frame mounting bolts
Remove shaft nob and shaft rod plate fixing
bolts.
Remove fuel cap
With an assistant to help to raise the front fender
and let it passed the handle bar and remove it
from frame.
IV-7