Chapter 2 Fuel System & Carburetion
Carburetor
CARBURETOR REMOVAL
Loosen the air filter tube and intake manifold
Throttle cable hook
bands.
Disconnect the throttle cable on carburetor side.
Remove the choke cable with choke piston.
Leave the throttle cable and choke cable on
vehicle.
NOTE
◦ Do not damage jet needle on the throttle piston
Disconnect the heater component on carburetor.
Disconnect the fuel tube from the carburetor.
Remove the carburetor.
Vacuum Chamber
DISASSEMBLY
Loosen the drain screw and drain the fuel from
Drain screw
the float chamber.
Remove the four vacuum chamber cover screws
and cover.
Remove the compression spring and the vacuum
piston.
Needle jet
Turn the vacuum piston upside down then
remove the needle holder and jet needle.
II-4
4