HER CHEE ATV-320 S Service Manual page 87

Chapter 4 Frame & Cover
320U
Remove L/R floor panel.
Remove front carrier (optional accessory).
Disconnect headlight, indicator light and main
switch connector.
Remove shaft nob and shaft rod plate fixing
bolts.
Remove two fender to frame mounting bolts
Remove four bumper cover to bumper and
headlight to bumper mounting bolts.
Remove fuel cap then remove fuel tank dash
board.
NOTE
◦ Lock the fuel cap to fuel tank as soon as
removed fuel tank dash board.
With an assistant to help to raise the front fender
and pull forward to passed the handle bar and
remove it from frame.
INSTALLATION
Install the rear fender in the reverse order of
removal.
NOTE
◦ Be sure to insert floor panel tabs to front and
read fenders corresponding slots.
IV-8