Time/Date - Yealink SIP-T20 User Manual

User Guide for the SIP-T20P/SIP-T20 IP Phone
3. Press
4. Press
Text displayed on the LCD screen will change to the selected language.
To change the language for web user interface:
1. Click on Se t tings->Preference.
2. Select the desired language from the pull-down list of L anguage.
3. Click Conf irm to accept the change.
Text displayed on the web user interface will change to the selected language.
The time and date are displayed on the LCD screen when the phone is idle. If the phone
cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
you need to configure the time and date manually. For more information on the SNTP
server, contact your system administrator.
To configure the SNTP settings via phone user interface:
1. Press
2. Select Se ttings->Basic->Time & Date->SNTP.
3. Press
Zone field.
18
or to select the desired language.
*1. English(English)
2. Français(French)
to accept the change.
.
or to select the time zone that applies to your area from the Time