Yealink SIP-T20 User Manual page 60
Enterprise ip phone
Hide thumbs
Also See for SIP-T20:
- User manual (126 pages) ,
- Quick start manual (39 pages) ,
- Owner's manual (20 pages)
Table of Contents
Advertisement
User Guide for the SIP-T20P/SIP-T20 IP Phone
2.
Enter the desired time within 1-14 (in seconds) in the Time-Out for Dial-Now Rule
field.
3.
Click Conf irm to accept the change.
Not e
Delay time for dial-now rule is configurable via web user interface only.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a count ry. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as ―code: 0592, Min
Length: 4, Maxi Length: 11‖, then when you dial out the number ―56789‖, which has the
digits between 4 to 11, the phone will add the area code and dial out the number
―059256789‖. You can only configure one area code rule on your phone.
To configure the area code via web user interface:
1.
Click on Se t tings->Dial Plan->Area Code.
2.
Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
48
Advertisement
Table of Contents
