Added “BLFListBargeInCode” configuration. Display HD characters. Configurable HotDesking feature. Added “NewCall” soft key when holding the call. Auto answer when receiving the special NOTIFY message from Asterisk server. Different dial tone when account is not registered. Yealink SIP Phones’ Firmware Change Log...
Page 3
After enabling “Feature Key Synchronisation”, the phone will not send 302 message to the server when No Answer Forward. It will prompt whether reboot the phone after you changing the System Log Level. It will display package time in the Product ID on the LCD. Yealink SIP Phones’ Firmware Change Log...
26. Fixed the issue that the version field of 802.1X can’t be updated according to switch dynamic, so the phone can’t be connected by 802.1X. 27. Fixed the phone crash issue when Action URL server was down. Yealink SIP Phones’ Firmware Change Log...
Page 5
53. Fixed the echo issue when there’s a second incoming call. 54. Fixed Push XML does not work issue. 55. Fixed the configuration of Push XML can’t take effect immediately issue. 56. Fixed no voice issue of Multicast Paging feature. Yealink SIP Phones’ Firmware Change Log...
When in a conversation, headset with headset port can speak and listen, and headset with handset port can only listen. This feature is disabled by default. Yealink SIP Phones’ Firmware Change Log...
Page 7
When “Paging Priority Active” is Disabled, the new paging call will be ignored temporarily. Detail: Please refer to V61 User Manual for details. 5. Added CosmoCom ACD and synchronization feature Path: PhoneDSS KeyMemory Key/Line Key Yealink SIP Phones’ Firmware Change Log...
Page 8
When invite message includes “History-info” header field, it will display the name of the first transferrer. When invite message includes “Diversion” header field, it will display the name of the last transferrer. This feature needs server support. Detail: Please refer to V61 User Manual for details. Yealink SIP Phones’ Firmware Change Log...
Page 9
10. Added display XML information from SIP Notify message feature. Path: PhoneFeaturesSIP Notify Instruction: The phone can display XML information from SIP Notify message, it’s disabled by default. Detail: Please refer to V61 User Manual for details. Yealink SIP Phones’ Firmware Change Log...
Path: Web page Account Advanced DTMF Type/How to INFO DTMF Instruction: When “Inband” or “RFC2833” was selected in the DTMF type, “How to INFO DTMF” will be gray, it can’t be configured. Yealink SIP Phones’ Firmware Change Log...
Page 11
Instruction: User can configure whether allow muting during the call or not. Default setting is Enabled. When the function is enabled, conversation could be muted when pressing Mute key, and Mute Key will be ineffective if disabled. Yealink SIP Phones’ Firmware Change Log...
Page 12
Path: Webpage Upgrade Advanced DHCP Option Value Instruction: The function enables user to configure DHCP option value, and DHCP server can identify the phone type. Default setting is yealink. Detail: Please refer to V61 User Manual for details.
Page 13
20.The DND, Forward, Anonymous Code will only be sent when the status changed. Instruction: DND、Forward、Anonymous code will only be sent when the status changed. The code will not be sent when the phone power-on. 21.Added “BLFListBargeInCode” configuration Path: Webpage Account Advanced BLFListBargeInCode Yealink SIP Phones’ Firmware Change Log...
Page 14
1) Pressing DSS Key: [ HotDesking_Dsskey ] path = /yealink/config/Setting/Setting.cfg RegisterName = (0 stands for not deleting original information, 1 stands for deleting original information and displaying this item. The default value is 1) Yealink SIP Phones’ Firmware Change Log...
Page 15
The function is configurable, and default setting of neutral firmware is enabled. 29.Supported upload multiple language files via auto-provision Configure Path: Configure following items via auto-provision Yealink SIP Phones’ Firmware Change Log...
Page 16
Instruction: The maximum length of XML browser URL is increased to 512 bytes. 37.Adjusted display way of display name of second incoming call Instruction: Due to the phone can’t display a long display name fully, now the display name of second incoming call displays home-left. Yealink SIP Phones’ Firmware Change Log...
Page 17
Path: Webpage Phone Features ReLogOffTime(1~1000 minutes) Instruction: The phone webpage will logout automatically over certain time without operation. The time is configurable. 41.802.1x password and AES Key are saved and transmitted as ciphertext Path1: Webpage Network Advanced MD5 Password Yealink SIP Phones’ Firmware Change Log...
Page 18
Path: Webpage Phone Features After Ring Time (seconds) Instruction: On Broadsoft server, “After Ring Time” is calculated by ring times. While in Yealink phones, “After Ring Time” is calculated by ring time(seconds). Now it changed to following ways in V61.
Page 19
45. It will display package time in the Product ID on the LCD. Path: Phone LCD Menu StatusMore…PhoneProduct ID Instruction: It will display package time in the Product ID on the LCD, the format is: XXXX-XXXX-XXXX(Year-Date-Hour), for example: 2011-1118-1906 . Yealink SIP Phones’ Firmware Change Log...