User Guide for the SIP-T20P/SIP-T20 IP Phone
3.
Enter the user name (admin) and password (admin) in the login page.
4.
Click Conf irm to login.
The phone status is displayed on the first page of the web user interface.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1.
Press
2.
Select Se ttings->Advanced (password: admin) ->Ne twork->WAN Port.
14
.