Yealink SIP-T20 User Manual page 66

User Guide for the SIP-T20P/SIP-T20 IP Phone
Using the headset

You can also dial the number first, and then choose the way you want to speak to the
other party.
You can also search and dial a contact from call history or local directory. For more
information, refer to
on page 33.
During a call, y ou can alternate between Speakerphone, Headset, and Handset modes
by pressing the Speakerphone key, HEADSET key, or picking up the handset.
The call duration of active calls is visible on the LCD screen. In the figure below, the call
to John has lasted 1 minute and 6 seconds.
To place a call using t he handset:
1. Pick up the handset.
2. Enter the desired number using the keypad.
3. Press
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer to
Not e
You can also dial using the SIP URI or IP address. To obtain the IP address of the phone,
press the O K key. The maximum SIP URI or IP address length is 32 characters. For
example, SIP URI: 2210@sip.com, IP: 192.168.1.15.
Your phone may no t support direct IP di aling. Contact your system administrator for more
information.
To place a call using t he hands-free speakerphone mode:
Do one of the following:
With the handset on-hook, press
-
Enter the desired number using the keypad.
Press
With the handset on-hook, enter the desired number using the keypad.
-
Press
54
Contact Management
John
01:06
or .
or .
, or .
on page 26 and Call History Management
Key as Send on page 20.
or the line key to obtain a dial tone.