Yealink SIP-T20 User Manual page 68

User Guide for the SIP-T20P/SIP-T20 IP Phone
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
- Press
With the handset on-hook and headset mode deactivated, press
-
With the handset on-hook and headset mode deactivated, press the line key (the
-
line LED flashes green).
To answer a call using the headset:
Do one of the following:
Press
-
With the headset mode activated, press
-
With the headset mode activated, press the line key (the line LED flashes green).
-
A nswering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the
following:
Press
-
The incoming call is answered and the original call is placed on hold.
- Press
Press
The incoming call is answered and the original call is placed on hold.
To e nd a call:
Do one of the following:
- If you are using the handset, hangs up the handset or press
- If you are using the headset, press
- If you are using the speakerphone, press
Not e
To end a call placed on hold, you should press the H O LD key to resume the call firstly
before ending it.
56
.
.
.
to access the new call.
.
.
.
or .
.
.