Yealink SIP-T20 User Manual page 37

4. Press
To s elect a ring tone for each account via web user interface:
1. Click on A ccount.
2. Select the desired account from the pull-down list of A ccount.
3. Click on Bas ic.
4. Select the desired ring tone from the pull-down list of Ring Type.
If Common is selected, this account will use the ring tone selected for the phone .
Refer to the above instruction.
5. Click Conf irm to accept the change.
Not e
A ring tone for the account is configurable via web user interface only.
The ring tone for an incoming call on the phone may be different. For e xample, when the
phone receives an incoming call from a contact stored in the local directory, it will play
the ring tone assigned to the contact in the contact directory (refer to
If no ring tone is assigne d to the contact, the phone will play the ring tone assigne d to the
associated group (refer to
assi gned to the acco unt. If no ring tone is assi gned to the acco unt, the phone will play the
ring tone assigned for the phone.
To upload a custom ring t one for your phone via web user interface:
1. Click on Se t tings->Preference.
to accept the change.
Adding Groups). Otherwise,the phone will play the ring tone
Customizing Your Phone
Adding Contacts).
25