Yealink SIP-T20 User Manual page 83

The SIP-T20P/SIP-T20 IP phone supports up to 3 parties (including yourself) in a
conference call. This is the default method of conference called Local Conference.
To s et up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press
The active call is placed on hold.
3. Enter the number of second party and press
Dial: 1234
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press or to select the call for conference and make sure the call is active
(for example, select the call on account 1).
3. Press to join the two calls in the conference on the selected account.
You can press to place the conference on hold. You can press
conference call into two individual calls. To drop the conference call, press
You can use network conference on the SIP-T20P/SIP-T20 IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1. Click on A ccount.
to place a new call.
or
123
Basic Call Features
.
to split the
.
71