Yealink SIP-T20 User Manual page 58

User Guide for the SIP-T20P/SIP-T20 IP Phone
5. Click A dd to add the replace rule.
When you enter the number ―1‖ using the keypad and then press the OK key, the
phone will dial out ―1234‖ instead.
Not e
The valid values of Account field can be one or more digits between 1 and 2. Each digit
must be separated by a comma. For example, when you enter the value ―1, 2‖ in the
Account field, this replace rule will apply to account1 and account2.
If you leave the Acco unt field blank or enter 0, the replace rule will apply to all accounts.
To e dit a replace rule via web user interface:
1. Click on Se t tings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the check box.
3. Edit the values in the P refix and Re place fields.
4. Enter the desired line ID in the A ccount field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Se t tings->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the check box(es).
3. Click De l to delete the replace rule(s).
Not e
Replace rule is configurable via web user interface only.
You can configure one or more dial-now rules (up to 100) on your phone. When the
dialed out number matches the dial-now string, the number will be dialed out
automatically. For example, a dial-now rule is configured as ―2xx‖, then any entered
three-digit string beginning with 2 will be dialed out automatically on the phone.
To add dial-now rule via web user interface:
1. Click on Se t tings->Dial Plan->Dial now.
2. Enter the desired value (e.g., 1234) in the Rule field.
46