Average Task Duration - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

2.2

Average task duration

Hardware: 10 minutes
The average task duration including preliminary and concluding steps is
indicated at the beginning of each procedure next to the procedure class.
Refer to table 1 on page 23
calculating the average task duration:
Step
Server shutdown
Disassembly
Transport
Maintenance
procedures
Transport
Assembly
Starting up
Table 1: Calculation of the average task duration
TX1310 M1
for an overview of steps taken into account for
included Explanation
Shutdown time depends on hardware and
software configuration and may vary
significantly.
no
Software tasks necessary before
maintenance are described in section
"Starting the maintenance task" on
page
yes Making the server available
Transporting the server to the service table
no (where required) depends on local
customer conditions.
Maintenance procedures including
yes
preliminary and concluding software tasks
Returning the server to its installation site
no (where required) depends on local
customer conditions.
yes Reassembling the server
Booting time depends on hardware and
no software configuration and may vary
significantly.
Upgrade and Maintenance Manual
63".
Before you start
23