Onboard Settings - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Appendix
Indicator
Power-on
indicator
16.3

Onboard settings

DIMM1B
DIMM2B
DIMM1A
DIMM2A
POWER1
Figure 168: Jumper
Setting Description
Default Password skip disabled and recovery BIOS disabled.
PWD Skip Password skip enabled.
The password is deleted and the default BIOS settings are
applied after "PWD Skip" jumper was set once.
RCVR Recovery BIOS enabled.
Use this function only if the system BIOS is destroyed.
After flashing a new Recovery BIOS from a memory stick the
password and all configuration settings are set to default.
When the CMOS battery is removed from a system board, the password set by
customers is kept and also other CMOS settings are restored except date/time.
230
Status Description
green on server is switched on and running
server is switched off, but mains voltage is
off
present (standby mode)
Upgrade and Maintenance Manual
Pin 1
Pin 2
Default
Pin 2
Pin 2 Pin 1
RCVR
PWD Skip
TX1310 M1
Pin 1