Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual page 94

Hard disk drives
Figure 42: Disconnecting SATA cables from the system board
Ê Disconnect the corresponding SATA cable(s) from the system board.
I
Push the edge (see arrow) of the system board with the finger to
avoid bending up the system board.
1 SATA cable to connector SATA1
2 SATA cable to connector SATA2
3 SATA cable to connector SATA3
4 SATA cable to connector SATA4
5 ODD cable to connector SATA5
6 free
For further cabling information, please refer to section
page 217.
94 Upgrade and Maintenance Manual
"Cables" on
TX1310 M1